This section describes those Status attributes that are specific to items on the DNP3 driver.
If an attribute displays the state Enabled Inactive, it means that it has an alarm feature enabled, but there are no alarms currently active (for the attribute). ClearSCADA is monitoring the attribute and will raise an alarm if it detects a problem.
For more information, see the topics that are listed in the gray footer section at the bottom of this topic. Select the relevant entry to display the topic that you require.
In addition to the attributes listed below, where a DNP3 outstation supports Device Attributes, one or more blocks of Device Attributes may be displayed (see Numeric List of DNP3 Outstation Device Attributes).
NOTE: This section is about status attributes that are specific to this driver. In addition to the status attributes mentioned here, this driver's extension drivers might support further status attributes. For information about driver-specific status attributes that are not covered in this section, see the relevant extension driver guide.
Further Information
<Update Type> Status attribute values that are specific to points on the DNP3 driver: see DNP3 Driver-Specific <Update Type> Status Values.