Zoom In on an X-Y Plot

To magnify the data on an X-Y Plot so that the data is shown in greater detail:

1. Display an X-Y Plot in Run Mode.

   NOTE: The Zoom In tool is also available when you are configuring the X-Y Plot in Design mode.

2. Either:
   1. Right-click above the X-Axis or to the right of the Y-Axis to display a context-sensitive menu.
   2. Select the Zoom In option.
   3. Repeat as necessary.

   Or:

   1. Select the Home tab on the ViewX ribbon.
   2. Select the Zoom In command from the relevant command group.
   3. Repeat as necessary.

   Or:

   1. Press the F7 function key.
   2. Repeat as necessary.

   Or:

   • Roll the mouse wheel forwards until the required level of magnification is shown.

   Or:

   1. Select the Home tab on the ViewX ribbon.
   2. Select the Zoom Box command from the relevant command group.
   3. With the left-hand mouse button depressed, draw a Zoom Box over the area you want to magnify, and then release the left-hand mouse button.
   4. Repeat as necessary.
      

To decrease the level of magnification, you need to use the Zoom Out tool (see Zoom Out on an X-Y Plot).