NOTE: Pulse actions have a subset of these attributes (see Status Attributes Associated with Pulse Actions).
Points on many drivers support a combination of these status attributes:
- Id
- Full Name
- Type
- Created—(New points only)
- Last Modified
- Configuration Change CRC—(Only displayed if this feature is enabled on your system)
- Exclusive Control User—(Only points that are under Exclusive Control)
- Queued Request—(Output points for which pick action requests are queued)
- Alarm State
- Alarm Last Updated
- No Change Alarm—(Points on which the No Change feature is enabled)
- Control Alarm—(Output points only)
- State Alarm
- Alarm Count
- Source Name
- Source
- Parent Point—(Points that have a parent point)
- Current Value
- Current State
- Last Updated
- Current Quality
- Current Status
- Override—(Where supported and enabled for a point)
- Put Aside Value—(Only displayed while an Override is in force)
- Put Aside State—(Only displayed while an Override is in force)
- Put Aside Last Updated—(Only displayed while an Override is in force)
- Put Aside Quality—(Only displayed while an Override is in force)
- Put Aside Status—(Only displayed while an Override is in force)
- Previous Update Value
- Previous Update State
- Previously Updated
- Previous Update Quality
- Previous Update Status
- Previous State
- State Change Value
- Last Changed State
- State Change Quality
- State Change Status
- Process Count
- Logged Value—(Points that have logged data)
- Logged State—(Points that have logged data)
- Logged Time—(Points that have logged data)
- Logged Quality—(Points that have logged data)
- Logged Status—(Points that have logged data)
- End of Period Value—(Points that have end of period data)
- End of Period State—(Points that have end of period data)
- End of Period Time—(Points that have end of period data)
- End of Period Quality—(Points that have end of period data)
- End of Period Status—(Points that have end of period data)
- Previous End of Period Value—(Points that have end of period data)
- Previous End of Period State—(Points that have end of period data)
- Previous End of Period Time—(Points that have end of period data)
- Previous End of Period Quality—(Points that have end of period data)
- Previous End of Period Status—(Points that have end of period data)
- Controls—(Output points only)
- Alarm Limits—(Analog and Counter-type points for which the limits are currently tuned)
- Current M/S State—(Analog points on which Master Station Alarm Limits are used)
- M/S Alarm Limits—(Analog points on which one or more of the Master Station Alarm Limits are tuned)
- Last Execution—(Calculation points only)
- Last Executed—(Calculation points only)
- Next Execution—(Calculation points only).
- Wonderware Historian Export—(Points with Historic data enabled).
For information on point status attributes that are not listed above, see the driver-specific documentation.